Guaranteed excellence: only the best brands
-
Oster - Cutting Head Flattop T - 0.5 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals and humans with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.5 mm.
Cutting width: 59 mm. about
Teeth pitch: 1.2 mm. about76918-216 -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Oster - Animal clipper blade #8e1/2 - 2.8mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 2.8 mm.
Cutting width: 43 mm. about
Teeth pitch: 1.8 mm. about11079 -
Oster - Animal clipper blade #10 - 1.6 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 1.6 mm.
Cutting width: 43 mm. about
Teeth pitch: 1.4 mm. about3393 -
Oster - Animal clipper blade #15 - 1.2 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 1.2 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about3392-1 -
Oster - Animal clipper blade #3 - 13 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 13 mm.
Cutting width: 42 mm. about
Teeth pitch: 4.5 mm. about3402 -
Oster - Animal clipper blade #30 - 0.5 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.5 mm.
Cutting width: 42 mm. about
Teeth pitch: 1.2 mm. about3392 -
Oster - Animal clipper blade #3F - 13 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 13 mm.
Cutting width: 42 mm. about
Teeth pitch: 1.8 mm. about3400 -
Oster - Animal clipper blade #4 - 9.5 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 9.5 mm.
Cutting width: 41 mm. about
Teeth pitch: 4.5 mm. about3398 -
Oster - Animal clipper blade #40 - 0.25 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.25 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about3391 -
Oster - Animal clipper blade #4F - 9.5 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 9.5 mm.
Cutting width: 42 mm. about
Teeth pitch: 1.8 mm. about3399 -
Oster - Animal clipper blade #5 - 6.3 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 6.3 mm.
Cutting width: 41 mm. about
Teeth pitch: 4 mm. about3396 -
Oster - Animal clipper blade #5/8 - 0.8 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.8 mm.
Cutting width: 19 mm. about
Teeth pitch: 1.2 mm. about3395 -
Oster - Animal clipper blade #50 - 0.02 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.02 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about3390-1 -
Oster - Animal clipper blade #5F - 6.3 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 6.3 mm.
Cutting width: 41 mm. about
Teeth pitch: 1.8 mm. about3396-1 -
Oster - Animal clipper blade #7 - 3.2 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 3.2 mm.
Cutting width: 41 mm. about
Teeth pitch: 4 mm. about3394-1 -
Oster - Animal clipper blade #7/8 - 0.8 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.8mm.
Cutting width: 19 mm. about
Teeth pitch: 1.2 mm. about3395-1 -
Oster - Animal clipper blade #7F - 3.2 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 3.2 mm.
Cutting width: 41 mm. about
Teeth pitch: 1.8 mm. about3394 -
Oster - Animal clipper blade #9 - 2.0mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 2.0mm.
Cutting width: 43 mm. about
Teeth pitch: 1.4 mm. about3393-2 -
Oster - Cutting Head # 000 - 0.5 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals and humans with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.5 mm.
Cutting width: 39 mm. about
Teeth pitch: 1.2 mm. about3348-30 -
Oster - Cutting Head # 00000 - 0.2 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals and humans with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0,2 mm.
Cutting width: 39 mm. about
Teeth pitch: 0,8 mm. about3348-50 -
Oster - Cutting Head # 1 e1/2 - 4 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 4 mm.
Cutting width: 43 mm. about
Teeth pitch: 2,1 mm. about3348-1.5 -
Oster - Cutting Head #0000 - 0.25 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 0.25 mm.
Cutting width: 39 mm. about
Teeth pitch: 0.9 mm. about3348-40 -
Oster - Cutting Head #3 e3/4 - 13 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 13 mm.
Cutting width: 49 mm. about
Teeth pitch: 2,1 mm. about3348-3.75 -
Oster - Golden A5 2-Speed Clipper
Professional pet clipper, "made in the USA", with 230V - 50/60Hz, 3200 rpm, 45W dual speed motor.
Oster Cryogen-X head with 3.2mm cutting height included in the package; the new Cryogen-X heads are about 20°C cooler than normal heads when in use.
Suitable for dogs, cats, horses and cattle or for veterinary use
Excellent cutting capacity
Induced motor + stator (electric motor principle)
Medium level of vibration and heating
Special oil lubricant
Clipper grease
Carbon for clipper
3 metres of electric cable
One-year warranty
Recommended for professionals or individuals with thick-haired animals
Guaranteed inspection by our in-house service and resharpening laboratory.
We recommend constant lubrication using the oil supplied in the pack to be applied to the blades after each use.
3386 -
Oster - Taglia Capelli - 616 Professional - tosatrice
Taglia capelli professionale a filo
Testine intercambiabili a sgancio rapido
Testina in acciaio inox da 3mm
Testina in acciaio inox da 1/10mm
Singola Velocità di taglio
Potenza di 9W
Motore con perno polarizzato
Non richiede manutenzione
Olio lubrificante
Cavo per la connessione diretta alla rete elettrica
Pennellino per pulizia
Garanzia di 1 anno
Buona per uso privato – Ottima per uso professionale - Controllo garantito dal nostro laboratorio interno di assistenza e riaffilatura.
Raccomandiamo una costante lubrificazione utilizando l’olio fornito all’interno della confezione da applicare sulle lame dopo ogni utilizzo.3382 -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2 -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB -
Oster - 3- Speed Dog Clipper A6 Slim
These professional Oster clippers allow you to shear your dog quickly and simply. This innovative product is now improved with 3 speeds and is also exceptionally quiet, comfortable to hold and lightweight. The slim design has an ergonomic shape that is comfortable to hold. Coupled with the slip proof outer covering, this gives it a super grip. Key features of the Oster A6 Slim clippers: On Level 1 the Oster A6 Slim clippers achieve 3100 cycles per minute, which means 3100 double strokes to cut fine fur. On Level 2 the clippers work at 3600 cycles per minute to cut medium-thick fur and Level 3 is designed for the thickest hair, and runs at 4100 cycles per minute. This model is quiet and low-vibration, even at the highest setting, to protect your joints and prevent them from tiring too quickly. The low noise makes these clippers suitable even for more timid animals. The Oster A6 Slim clippers are available without a clipper blades, so that you can use them with any Oster A5 clipper blades. The clipper bladess are interchangeable, and easy to attach. This makes them easy for anyone to use, even non-professionals. The Oster A6 Slim is just as good for general shearing as it is for trimming and fine details. Oster A6 Slim clippers at a glance: 3-Speed clippers, suitable for private or professional use Ideal for home use as well as for professionals, for complete shearing as well as finer details High powered motor: Low noise and unlikely to heat up, with automatic tension adjustment, to ensure the motor will last a long time Ergonomic design: Slim casing made of lightweight materials, covered with a rubber layer, making the clippers comfortable to hold and non-slip With anti-vibration system: Quiet running that protects your joints at all speeds, avoiding fatigue Dimensions (L x W x H): 26.7 x 15.2 x 7.6 cm Lead length: 3.66m cable for maximum flexibility Power: 15 Watt/7.5 Volt Capacity at 3 different speeds: Level 1: 3100 cycles/minute – for fine fur, shearing to the skin Level 2: 3600 cycles/minute – for medium-thick fur Level 3: 4100 cycles/minute - for thick fur Delivered without clipper blades - Compatible with all Oster A5 clipper blades! Weight: 370g (without lead) Included with this product: Oster A6 Slim Clippers Clipper blade oil Cleaning brush Instructions for use Please note: Important: To maintain the life of the product, you should oil the clipper blades every 3-4 minutes during continuous use, as described in the product user guide. If there is not enough oil between the two metal surfaces, they will rub together, and the clipper blades will wear out more quickly.10160 -
Oster - 97-44 Professional Clipper - Tagliacapelli 1 velocità
Taglia Capelli a filo di tipo professionale, "made in USA", con motore 230V - 50/60Hz, 2200 giri al minuto, 45W a singola velocità.
Testina Oster Cryogen-X con altezza di taglio di 0.25mm compresa nella confezione; le nuove testine Cryogen-X in fase di utilizzo risultano più fredde di circa 20°C rispetto alle normali testine.
Ottima per uso professionale, buona per uso domestico
Ottima capacità di taglio
Motore indotto + statore (principio del motore elettrico)
Medio livello di vibrazioni e riscaldamento
Olio speciale lubrificante
Grasso per motore
Carboncino di ricambio per motore
3 metri di cavo elettrico
Garanzia di un anno
Controllo garantito dal nostro laboratorio interno di assistenza e riaffilatura.
Raccomandiamo una costante lubrificazione utilizando l’olio fornito all’interno della confezione da applicare sulle lamedopo ogni utilizzo.3410 -
Oster - Animal clipper blade #10WIDE - 2.4 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 2.4 mm.
Cutting width: 67 mm. about
Teeth pitch: 2 mm. about3393W -
Oster - Cutting Head #1A - 3,2 mm - for A5 and 97- 44
Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)
Cutting height: 3,2 mm.
3348-1A