Guaranteed excellence: only the best brands

TECHNICAL FEATURES:
Led: 2x SST40 LEDs for the main flashlight and 20x CRI >90 warm light (4000K) diodes for the lantern
Operating Modes: 5 light powers for the flashlight and 7 types of lighting for the lantern
Flashlight Powers and Durations: 3000 Lumens (N.D.) -> 1000 Lumens (10h.) -> 300 Lumens (21h.) -> 35 Lumens (100h.) -> 1 Lumen (600h.)
Peak power: 23100 candelas
Maximum lighting distance: 300m.
Powers and Durations White light lantern: 400 Lumens (7h.) -> 55 Lumens (60h.) -> 5 Lumens (200h.) -> 35 Lumens (100h.) -> 1 Lumen (600h.)
Powers and Durations Red light lantern: 10 Lumens (80h.) -> 2 Lumens (260h.) -> S.O.S. -> BEACON
Peak power: 70 candelas
Body: ABS 
Batteries: built-in, rechargeable, non-removable, Li-ion, 10000mAh
Measurements: 11.3cm (H) - 6.0cm (W) - 3.4cm (Thick.)
Weight: 271g.
Accessories included: USB/USB-C charging cable
Waterproofness: as per IP67 standard
Impact resistance: withstands falls from 1m height
Notes: Can be used as an 18W powerbank, compatible with QC (Quick Charge) technology - built-in folding hook for hanging from ceiling

NITECORE EDC27 is a compact and ultra-slim flashlight with extraordinary light output. Its thin and rigid construction is made of high-strength stainless steel with a PVD titanium coating, with a carbon fiber reinforced polymer (CFRP) frame for excellent impact and torsion resistance.

It uses 2 Luminus SST40 LEDs for uniform light, with a maximum output of 3,000 lumens and a maximum range of 220 meters. The flashlight is equipped with a hybrid heat dissipation system for longer light duration and powered by a built-in 1,700mAh Li-ion battery.

It is rechargeable via USB-C and has a multifunctional OLED display showing brightness level, battery voltage and time remaining. It can be attached to the MOLLE system of a backpack or pocket with the included clip and has an IP54 rating for all-weather use.

The EDC27 features a hybrid heat dissipation system. Combined with the copper material and aluminum outer plate, as well as the Advanced Temperature Regulation (ATR) module, the EDC27 solves the heat dissipation problem of conventional EDC flashlights to provide longer lighting life.

Powered by the built-in 1,700mAh lithium-ion battery, the EDC27 can provide up to 37 hours of battery life. It is USB-C rechargeable and available with a reversible socket, while the charging socket cover is made to provide excellent resistance to moisture, dust and shock.

The multifunctional OLED display can show the brightness level, battery voltage, remaining battery life and more in real time. With a sturdy clip included, the EDC27 can be attached to the MOLLE system of a backpack or pocket.




TECHNICAL DATA:

LEDs: 2x Luminus SST40 with a life cycle of 50,000 hours
Brightness Levels: 5 light powers + STROBO
Powers and Durations: 3000 Lumens (N.D.) -> 1000 Lumens (1.45h. ) -> 200 Lumens (3.45h.) -> 65 Lumens (11h.) -> 15 Lumens (37h.)
Peak power: 12,200 candelas
Maximum lighting distance: 220m.
Lighting method: Dedicated on/off button
Light selection method: When on, lightly pressing the power button
Body: stainless steel with titanium PVD coating
Battery: Built-in 1,700mAh Li-Ion type, equipped with built-in USB-C type charging system
Measurements: 13.5cm (Length) -3.14cm (Width,) - 2.07cm (Thickness)
Weight: 124g.
Accessories: wrist strap, USB charging cable
Waterproofness: as per IP54 standard, resists dust and light splashes of water
Impact resistance: withstands falls from 1m height
Notes: equipped with built-in charging system via USB-C port (cable included, power adapter not included

The Nitecore P23i flashlight is the latest addition to the Precise series. Using a Luminus SFT-70 LED with a combined crystal-coated optical system and "Precision Digital Optics Technology" (PDOT), it has a maximum output of 3,000 lumens, ideal for law enforcement, assault operations, the self-defense, search and patrols.

Led: 1x Luminus SFT-70 LED with a life cycle of 50,000 hours
Operating modes: 4, electronically regulated + Strobe
Powers and Duration: 3000 Lumen (30min.) -> 1500 Lumen (2h 30min) -> 800 Lumen (4h) -> 250 Lumen (10h) -> 50 Lumen (45h) -> Strobe 3000 lumen
Peak power: 55300 candles
Maximum lighting distance: 470m.
Ignition method: Rear Button with "Momentary On" system for light signals and Rear "Mode" Button for immediate access to the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra clear hardened glass with anti-reflection treatment
Batteries: Works only with a Nitecore "i series" 21700 rechargeable battery (NL2150i, 5,000 mAh - included in the package).
Measurements: 14.3cm (L) - 2.54cm (D stem) - 3.18cm (D head)
Weight: 113g. batteries excluded
Accessories: wrist strap, cordura sheath, spare o-ring, clip
Impermeability: as per IPX-8 standard, submersible up to 2mt. of depth for 30min.
Sheath: in tactical cordura
Impact resistance: withstands falls from a height of 2m

Italian guarantee Nitecore Italy: Torch guaranteed for 5 years - Battery guaranteed for 12 months

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

Key Features

Triple output USB-C rechargeable headlamp, made of solid metal
It uses a Luminus SST-40-W primary LED with a maximum output of 1,750 lumens
Equipped with two auxiliary lights: one white with high CRI (CRI≥90, Color temperature: 4500K) and one red
Unibody lens of TIR type to emit a uniform and soft light
Maximum light intensity of 7,000cd and maximum range of 165 meters
The highly efficient constant current circuit provides stable light output for up to 800 hours
Built-in Li-ion battery charging circuit, via USB-C port
180 ° adjustable tilt angle for various lighting needs
The indicator under the switch indicates the remaining battery charge (Patent ZL201220057767.4)
The indicator also indicates the battery voltage (± 0.1V)
Built-in advanced temperature regulation module (ATR) (Patent ZL201510534543.6)
Constructed from aircraft grade aluminum alloy
Tough anodized finish, military grade HA III
Classified as waterproof and dustproof as per IP68 standard (submersible up to 2m)
Shock resistant up to 2 meters high

LED: 1x Luminus SST-40-W with a lifespan of 50,000 hours
Output: 8x constant light output, digitally regulated and 3 signaling modes
Power and duration of main white light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 900 lumens (2.15h.) -> 1750 lumens (30 * min. - without holding account of automatic temperature adjustment) -> Beacon -> SOS
Powers and durations of the auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (57h.)
Powers and duration of auxiliary white light: 24 lumens (42h.)
Range: up to 165mt.
Peak of power: 7000 candles
Usable batteries: 1x 3.6V 18650HP (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 90.8x34.7x26.9 mm.
Weight: 65.5g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Accessories included: 1x 3.6V and 3500mAh 18650 NL1835HP battery - USB charging cable - front elastic strap - front bracket - spare rubber button - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.
Notes: waterproof and submersible as per IP68 standard - the 1750 lumens of power can only be obtained using a battery with discharge power equal to or greater than 8A (included); using different batteries, the maximum output will be limited to 900 lumens.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 HP 3500mAh

WHY CHOOSE:
Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Light with strong spot - Integrated UV light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:
- Uses a Luminus SST-40-W LED with a maximum output power of 1,800 lumens
- UV light uses 4 x UV LEDs (320mW, 365nm wavelength)
- Glass and dishes with anti-reflective, crystal coating and PDOT treatments
- High-efficiency circuits to allow constant light for up to 50 hours continuously
- Dual rear power and selection buttons, quick and intuitive, designed for tactical applications
- STROBE READY technology that enables instant access to STROBO light
- STROBE light continuously varies randomly in frequency to increase disorientation effect
- Possibility to change the mode of use between Tactical Mode and Daily Mode
- Integrated charging system for Li-ion batteries via USB-C port
- NITECORE 21700 Li-ion battery included
- Impact-resistant silicon nitride front crown for excellent emergency glass-breaking capabilities
- Integrated ATR temperature control system
- Optical type lenses with anti-scratch coverage on both sides
- Made of anodized aircraft aluminum alloy with military grade HA III finish
- Waterproof as per IP68 standard (Submersible to 2 meters depth)
- Withstands impacts up to 2 meters high

Laboratory certified power and lifetime as per ANSI/NEMA FL1 standard using 1x 21700i 3.7V 4000mAh - under different usage conditions or using different batteries, data may vary

LED: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 3, electronically controlled + Strobe
Powers and Times: 1800 lumens (1h 45min.) -> 250 Lumens (8h 30min) -> 35 Lumens (38h) -> UV 320mW (30h) -> Strobe 1800 lumens
Peak power: 28500 candles
Maximum Lighting Distance: 337m
Ignition Method: Rear Button with "Momentary On" system for light signals and Rear Button "Mode" for immediate access to strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2140i, 4,000mAh - included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power.
Measurements: 15.0cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 124g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: thermoplastic, rigid, for quick deployment of the flashlight
Impact resistance: it resists falls from 1.5m height

WHY CHOOSE IT:

Tactical / military use - High luminous power - Very compact dimensions - Convenient integrated charging system - Light with strong spot - Practicality and immediacy of light selection commands. Thanks to Strobe Ready technology, just press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head
* NITECORE 21700 rechargeable battery (NL2140i, 4,000mAh) included in the package
* Uses a Luminus SST-40-W LED for a maximum output power of 1800 lumens
* Maximum light intensity in the center point of 21100cd. and maximum range of 290 meters
* Glasses and parables with anti-reflective treatments, crystal coating and with PDOT (Precision Digital Optics Technology)
* Integrated potentiometer with indicator that indicates the residual charge and residual voltage of the battery
* Constructed from solid aircraft grade aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7V 3500mAh - in different conditions of use or using different batteries, the data may vary

Led: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 4, electronically regulated
Powers and Durations: 1800 lumens (1h 30min.) -> 280 Lumens (7h 15min) -> 35 Lumens (38h) -> Strobo 1800 lumens
Peak power: 21100 candles
Maximum illumination distance: 290m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear "Mode" button to immediately access the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: Works with a rechargeable 21700 rechargeable battery (NL2140i, 4,000mAh) (included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power
Measurements: 14.7cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 84g. batteries excluded
Accessories: wrist strap, NTH10 tactical polymer sheath, spare o-ring, clip
Water resistance: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Sheath: Tactical sheath compatible with molle bindings
Impact resistance: withstands drops from 1.5m in height

Italian Warranty Nitecore Italia: Torch guaranteed 5 years - Battery guaranteed 12 months

The first Nitecore flashlight that works with a powerbank and is controlled wirelessly via a wrist remote control!

KEY FEATURES:

• Adjustable and swiveling dual output headlamp for Spot and Flood light
• The Spot light uses 4 CREE LEDs with a maximum output of 1,600 lumens, an intensity of 6,570cd and a lighting distance of 162 meters
• The Flood light uses a CREE LED with wide angle illumination optics, up to 170 ° amplitude
• There are 10 adjustable and mixable Spot / Flood brightness levels
• Adjustable both directly on the torch and with a wireless remote control from the wrist
• 100 ° vertical tilt angle to meet different lighting needs
• Highly efficient constant current circuit provides stable light output
• Convenient USB-A socket, compatible with universal USB power sources
• ATR (Advanced Temperature Regulation) technology for temperature regulation
• Front band included, light and breathable
• Constructed from aircraft grade aluminum alloy
• Rugged HAIII military specification anodizing
• Resistant to water and dust as per IP67 standard
• Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

LED: 4x Cree XP-G3 S3 + 1x Cree E2 XHP35 HD with life cycle of 50,000 hours
Output 5 diffused light outputs and 5 deep light outputs, digitally adjusted, constant and mixable with each other as needed
Spot powers and durations: 5 lumens (45h.) -> 50 lumens (23h.) -> 200 lumens (9.30h.) -> 480 lumens (5h.) -> 1600 (4h.)
Flood powers and durations: 5 lumens (45h.) -> 50 lumens (21h.) -> 200 lumens (7.30h.) -> 480 lumens (4.30h.) -> 1200 (3h.)
Range: up to 162m.
Peak of power: 6570 candles
Usable batteries: powered by USB powerbank * (not included - sold separately) such as Nitecore F4 or Nitecore NB10000
Torch dimensions: 47.6x43.2x42.1 mm.
Weight: 142.5g (support and headband included, power supply not included)
Lens: hardened glass with anti-reflective treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Water resistance: water resistant as per IP67 standard
Included Accessories: 2x USB Clip - Front Band - Wireless Wrist Remote Control

Note: The data shown was measured in accordance with the international ANSI / PLATO FL 1-2019 lighting test standard using a 5,000mAh Power Bank under laboratory conditions. The data may vary slightly in actual use conditions due to the type of power supply used, usage habits and environmental factors.

* Nitecore recommends using power sources with an output of at least 18W and QC system, otherwise the TURBO level will not be available.

FREQUENT QUESTIONS:
Q: is the flashlight compatible with the battery pack of the Nitecore HC70 model?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: Is the flashlight compatible with the Nitecore F1 / F2 / F4 charger / powerbank?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: is the flashlight compatible with the Nitecore NB10000 powerbank?
A: Yes, it is perfectly compatible and can produce 1600 lumens of power.